Peugeot 308 1.2T Stage 1: 130→169hp
Peugeot 308 1.2T Stage 1: 130hp → 169hp, 230→310Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens + remote.…
Peugeot 308 Stage 1: 130 hp → 169 hp
Factory output for the Peugeot 308 1.2T is 130 hp and 230 Nm. A Stage 1 remap targets 169 hp and 310 Nm — 39 hp (+30%) and 80 Nm (+35%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
What 39 hp changes on the road
A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 1.2T from 130 hp to 169 hp, with torque from 230 Nm to 310 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.
Gains of this size (+30%) are normal for this kind of engine on pump fuel, with no hardware changes.
What Stage 1 involves on a Peugeot 308
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 130 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 169 hp and 310 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Peugeot 308 remap price and booking
Stage 1 for the Peugeot 308 1.2T starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Peugeot 308 engines
- Peugeot 308 1.2T PureTech — Stage 1 (110hp stock)
- Peugeot 308 1.2T PureTech — Stage 1 (130hp stock)
- Peugeot 308 1.5 BlueHDi — Stage 1 (130hp stock)
- Peugeot 308 1.6 BlueHDi — Stage 1 (100hp stock)
- Peugeot 308 1.6 BlueHDi — Stage 1 (120hp stock)
- Peugeot 308 1.6 E HDi — Stage 1 (115hp stock)
- Peugeot 308 1.6 HDi — Stage 1 (110hp stock)
- Peugeot 308 1.6 HDi — Stage 1 (112hp stock)
- Peugeot 308 1.6 HDi — Stage 1 (90hp stock)
- Peugeot 308 1.6 HDi — Stage 1 (92hp stock)
More Peugeot tuning
- Peugeot 308 GTI 1.6T — Stage 1 (270hp stock)
- Peugeot 4007 2.2 HDi — Stage 1 (156hp stock)
- Peugeot 4008 1.6 HDi — Stage 1 (112hp stock)
- Peugeot 406 2.0 HDi — Stage 1 (90hp stock)
- Peugeot 407 1.6 HDi — Stage 1 (110hp stock)
- Peugeot 408 1.6 THP — Stage 1 (163hp stock)
- Peugeot 5008 1.6 HDi — Stage 1 (110hp stock)
- Peugeot 508 1.6 Ehdi — Stage 1 (115hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning