Peugeot 407 2.0 HDi Stage 1: 163→197hp
Peugeot 407 2.0 HDi Stage 1: 163hp → 197hp, 340→406Nm. Custom DMS calibration written for your car — not an off-the-shelf file. From €450. Athens + remote.…
Peugeot 407 Stage 1: 163 hp → 197 hp
Factory output for the Peugeot 407 2.0 HDi is 163 hp and 340 Nm. A Stage 1 remap targets 197 hp and 406 Nm — 34 hp (+21%) and 66 Nm (+19%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
Where the 66 Nm shows up
On a diesel the useful change is torque, not peak power. Going from 340 Nm to 406 Nm fills in the mid-range, which is where a Peugeot 407 actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.
Peak power moves too, 163 hp to 197 hp, but you will feel the 66 Nm far more often than the 34 hp.
What Stage 1 involves on a Peugeot 407
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 163 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 197 hp and 406 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which Peugeot 407 this covers
These figures are for the 2.0 HDi as fitted 2005–2010. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
Peugeot 407 remap price and booking
Stage 1 for the Peugeot 407 2.0 HDi starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Peugeot 407 engines
- Peugeot 407 2.2 HDi — Stage 1 (170hp stock)
- Peugeot 407 2.7 HDi V6 — Stage 1 (204hp stock)
- Peugeot 407 3.0 HDi — Stage 1 (241hp stock)
- Peugeot 407 1.6 HDi — Stage 1 (110hp stock)
- Peugeot 407 2.0 HDi — Stage 1 (136hp stock)
More Peugeot tuning
- Peugeot 408 1.6 THP — Stage 1 (163hp stock)
- Peugeot 5008 1.6 HDi — Stage 1 (110hp stock)
- Peugeot 508 1.6 Ehdi — Stage 1 (115hp stock)
- Peugeot 607 2.0 HDi — Stage 1 (109hp stock)
- Peugeot 807 2.0 HDi — Stage 1 (110hp stock)
- Peugeot 1007 1.4 HDi — Stage 1 (68hp stock)
- Peugeot 108 1.0 PureTech — Stage 1 (68hp stock)
- Peugeot 2008 1.2T PureTech — Stage 1 (110hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning