Peugeot 308 1.5 BlueHDi Stage 1: 130→168hp
Peugeot 308 1.5 BlueHDi Stage 1: 130hp → 168hp, 300→355Nm. Custom DMS calibration written for your car — not an off-the-shelf file. From €450. Athens +…
Peugeot 308 Stage 1: 130 hp → 168 hp
Factory output for the Peugeot 308 1.5 BlueHDi is 130 hp and 300 Nm. A Stage 1 remap targets 168 hp and 355 Nm — 38 hp (+29%) and 55 Nm (+18%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
Where the 55 Nm shows up
On a diesel the useful change is torque, not peak power. Going from 300 Nm to 355 Nm fills in the mid-range, which is where a Peugeot 308 actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.
Peak power moves too, 130 hp to 168 hp, but you will feel the 55 Nm far more often than the 38 hp.
What Stage 1 involves on a Peugeot 308
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 130 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 168 hp and 355 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which Peugeot 308 this covers
These figures are for the 1.5 BlueHDi as fitted 2017–2021. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
Peugeot 308 remap price and booking
Stage 1 for the Peugeot 308 1.5 BlueHDi starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Peugeot 308 engines
- Peugeot 308 1.6 BlueHDi — Stage 1 (100hp stock)
- Peugeot 308 1.6 BlueHDi — Stage 1 (120hp stock)
- Peugeot 308 1.6 E HDi — Stage 1 (115hp stock)
- Peugeot 308 1.6 HDi — Stage 1 (110hp stock)
- Peugeot 308 1.6 HDi — Stage 1 (112hp stock)
- Peugeot 308 1.6 HDi — Stage 1 (90hp stock)
- Peugeot 308 1.6 HDi — Stage 1 (92hp stock)
- Peugeot 308 1.6 PureTech GPF — Stage 1 (225hp stock)
- Peugeot 308 1.6 PureTech GTI GPF — Stage 1 (263hp stock)
- Peugeot 308 1.6 THP — Stage 1 (140hp stock)
More Peugeot tuning
- Peugeot 4007 2.2 HDi — Stage 1 (156hp stock)
- Peugeot 4008 1.6 HDi — Stage 1 (112hp stock)
- Peugeot 406 2.0 HDi — Stage 1 (90hp stock)
- Peugeot 407 1.6 HDi — Stage 1 (110hp stock)
- Peugeot 408 1.6 THP — Stage 1 (163hp stock)
- Peugeot 5008 1.6 HDi — Stage 1 (110hp stock)
- Peugeot 508 1.6 Ehdi — Stage 1 (115hp stock)
- Peugeot 607 2.0 HDi — Stage 1 (109hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning