Peugeot 2008 1.5 BlueHDi Stage 1: 100→145hp
Peugeot 2008 1.5 BlueHDi Stage 1: 100hp → 145hp, 250→348Nm. Custom DMS calibration written for your car — not an off-the-shelf file. From €450. Athens +…
Peugeot 2008 Stage 1: 100 hp → 145 hp
Factory output for the Peugeot 2008 1.5 BlueHDi is 100 hp and 250 Nm. A Stage 1 remap targets 145 hp and 348 Nm — 45 hp (+45%) and 98 Nm (+39%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
Where the 98 Nm shows up
On a diesel the useful change is torque, not peak power. Going from 250 Nm to 348 Nm fills in the mid-range, which is where a Peugeot 2008 actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.
Peak power moves too, 100 hp to 145 hp, but you will feel the 98 Nm far more often than the 45 hp.
What Stage 1 involves on a Peugeot 2008
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 100 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 145 hp and 348 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which Peugeot 2008 this covers
These figures are for the 1.5 BlueHDi as fitted 2016–2020. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
Peugeot 2008 remap price and booking
Stage 1 for the Peugeot 2008 1.5 BlueHDi starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Peugeot 2008 engines
- Peugeot 2008 1.5 BlueHDi — Stage 1 (130hp stock)
- Peugeot 2008 1.6 BlueHDi — Stage 1 (100hp stock)
- Peugeot 2008 1.6 BlueHDi — Stage 1 (120hp stock)
- Peugeot 2008 1.6 E HDi — Stage 1 (115hp stock)
- Peugeot 2008 1.6 E HDi — Stage 1 (92hp stock)
- Peugeot 2008 1.2 PureTech GPF — Stage 1 (100hp stock)
- Peugeot 2008 1.2 PureTech GPF — Stage 1 (110hp stock)
- Peugeot 2008 1.2 PureTech GPF — Stage 1 (130hp stock)
- Peugeot 2008 1.2 PureTech GPF — Stage 1 (155hp stock)
- Peugeot 2008 1.2T PureTech — Stage 1 (110hp stock)
More Peugeot tuning
- Peugeot 206 1.4 — Stage 1 (75hp stock)
- Peugeot 207 1.6 THP — Stage 1 (150hp stock)
- Peugeot 208 1.4 HDi — Stage 1 (68hp stock)
- Peugeot 3008 1.6 HDi — Stage 1 (110hp stock)
- Peugeot 306 2.0 HDi — Stage 1 (90hp stock)
- Peugeot 307 1.4 HDi — Stage 1 (68hp stock)
- Peugeot 308 1.6 THP — Stage 1 (155hp stock)
- Peugeot 4007 2.2 HDi — Stage 1 (156hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning