Peugeot 5008 2.0 BlueHDi 062019 Stage 1: 150→210hp
Peugeot 5008 2.0 BlueHDi 062019 Stage 1: 150hp → 210hp, 370→465Nm. Custom DMS calibration written for your car — not an off-the-shelf file. From €450.…
Peugeot 5008 Stage 1: 150 hp → 210 hp
Factory output for the Peugeot 5008 2.0 BlueHDi 062019 is 150 hp and 370 Nm. A Stage 1 remap targets 210 hp and 465 Nm — 60 hp (+40%) and 95 Nm (+26%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
Where the 95 Nm shows up
On a diesel the useful change is torque, not peak power. Going from 370 Nm to 465 Nm fills in the mid-range, which is where a Peugeot 5008 actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.
Peak power moves too, 150 hp to 210 hp, but you will feel the 95 Nm far more often than the 60 hp.
What Stage 1 involves on a Peugeot 5008
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 150 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 210 hp and 465 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which Peugeot 5008 this covers
These figures are for the 2.0 BlueHDi 062019 as fitted 2017–2020. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
Peugeot 5008 remap price and booking
Stage 1 for the Peugeot 5008 2.0 BlueHDi 062019 starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Peugeot 5008 engines
- Peugeot 5008 2.0 BlueHDi — Stage 1 (150hp stock)
- Peugeot 5008 2.0 BlueHDi Eat6 — Stage 1 (180hp stock)
- Peugeot 5008 2.0 BlueHDi Eat8 — Stage 1 (180hp stock)
- Peugeot 5008 2.0 BlueHDi Euro 63 2021 — Stage 1 (180hp stock)
- Peugeot 5008 2.0 HDi — Stage 1 (150hp stock)
- Peugeot 5008 2.0 HDi — Stage 1 (163hp stock)
- Peugeot 5008 1.2 PureTech GPF — Stage 1 (130hp stock)
- Peugeot 5008 1.2T PureTech — Stage 1 (130hp stock)
- Peugeot 5008 1.5 BlueHDi — Stage 1 (130hp stock)
- Peugeot 5008 1.6 BlueHDi — Stage 1 (100hp stock)
More Peugeot tuning
- Peugeot 508 1.6 Ehdi — Stage 1 (115hp stock)
- Peugeot 607 2.0 HDi — Stage 1 (109hp stock)
- Peugeot 807 2.0 HDi — Stage 1 (110hp stock)
- Peugeot 1007 1.4 HDi — Stage 1 (68hp stock)
- Peugeot 108 1.0 PureTech — Stage 1 (68hp stock)
- Peugeot 2008 1.2T PureTech — Stage 1 (110hp stock)
- Peugeot 206 1.4 — Stage 1 (75hp stock)
- Peugeot 207 1.6 THP — Stage 1 (150hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning