Peugeot 307 2.0 HDi Stage 1: 90→120hp
Peugeot 307 2.0 HDi Stage 1: 90hp → 120hp, 205→271Nm. Custom DMS calibration written for your car — not an off-the-shelf file. From €450. Athens + remote.…
Peugeot 307 Stage 1: 90 hp → 120 hp
Factory output for the Peugeot 307 2.0 HDi is 90 hp and 205 Nm. A Stage 1 remap targets 120 hp and 271 Nm — 30 hp (+33%) and 66 Nm (+32%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
Where the 66 Nm shows up
On a diesel the useful change is torque, not peak power. Going from 205 Nm to 271 Nm fills in the mid-range, which is where a Peugeot 307 actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.
Peak power moves too, 90 hp to 120 hp, but you will feel the 66 Nm far more often than the 30 hp.
What Stage 1 involves on a Peugeot 307
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 90 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 120 hp and 271 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which Peugeot 307 this covers
These figures are for the 2.0 HDi as fitted 2001–2008. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
Peugeot 307 remap price and booking
Stage 1 for the Peugeot 307 2.0 HDi starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Peugeot 307 engines
- Peugeot 307 1.4 HDi — Stage 1 (68hp stock)
- Peugeot 307 1.6 HDi — Stage 1 (110hp stock)
- Peugeot 307 1.6 HDi — Stage 1 (90hp stock)
- Peugeot 307 2.0 HDi — Stage 1 (109hp stock)
- Peugeot 307 2.0 HDi — Stage 1 (136hp stock)
- Peugeot 307 2.0 HDi — Stage 1 (150hp stock)
More Peugeot tuning
- Peugeot 308 1.6 THP — Stage 1 (155hp stock)
- Peugeot 4007 2.2 HDi — Stage 1 (156hp stock)
- Peugeot 4008 1.6 HDi — Stage 1 (112hp stock)
- Peugeot 406 2.0 HDi — Stage 1 (90hp stock)
- Peugeot 407 1.6 HDi — Stage 1 (110hp stock)
- Peugeot 408 1.6 THP — Stage 1 (163hp stock)
- Peugeot 5008 1.6 HDi — Stage 1 (110hp stock)
- Peugeot 508 1.6 Ehdi — Stage 1 (115hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning