Peugeot 607 2.2 HDi Stage 1: 133→176hp
Peugeot 607 2.2 HDi Stage 1: 133hp → 176hp, 317→394Nm. Custom DMS calibration written for your car — not an off-the-shelf file. From €450. Athens + remote.…
Peugeot 607 Stage 1: 133 hp → 176 hp
Factory output for the Peugeot 607 2.2 HDi is 133 hp and 317 Nm. A Stage 1 remap targets 176 hp and 394 Nm — 43 hp (+32%) and 77 Nm (+24%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
Where the 77 Nm shows up
On a diesel the useful change is torque, not peak power. Going from 317 Nm to 394 Nm fills in the mid-range, which is where a Peugeot 607 actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.
Peak power moves too, 133 hp to 176 hp, but you will feel the 77 Nm far more often than the 43 hp.
What Stage 1 involves on a Peugeot 607
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 133 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 176 hp and 394 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which Peugeot 607 this covers
These figures are for the 2.2 HDi as fitted 2000–2011. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
Peugeot 607 remap price and booking
Stage 1 for the Peugeot 607 2.2 HDi starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Peugeot 607 engines
- Peugeot 607 2.2 HDi — Stage 1 (170hp stock)
- Peugeot 607 2.7 HDi V6 — Stage 1 (204hp stock)
- Peugeot 607 3.0 HDi — Stage 1 (240hp stock)
- Peugeot 607 2.0 HDi — Stage 1 (109hp stock)
- Peugeot 607 2.0 HDi — Stage 1 (136hp stock)
More Peugeot tuning
- Peugeot 807 2.0 HDi — Stage 1 (110hp stock)
- Peugeot 1007 1.4 HDi — Stage 1 (68hp stock)
- Peugeot 108 1.0 PureTech — Stage 1 (68hp stock)
- Peugeot 2008 1.2T PureTech — Stage 1 (110hp stock)
- Peugeot 206 1.4 — Stage 1 (75hp stock)
- Peugeot 207 1.6 THP — Stage 1 (150hp stock)
- Peugeot 208 1.4 HDi — Stage 1 (68hp stock)
- Peugeot 3008 1.6 HDi — Stage 1 (110hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning