Peugeot 408 1.6 THP Stage 1: 163→195hp
Peugeot 408 1.6 THP Stage 1: 163hp → 195hp, 240→302Nm. Custom DMS calibration written for your car — not an off-the-shelf file. From €450. Athens + remote.…
Peugeot 408 Stage 1: 163 hp → 195 hp
Factory output for the Peugeot 408 1.6 THP is 163 hp and 240 Nm. A Stage 1 remap targets 195 hp and 302 Nm — 32 hp (+20%) and 62 Nm (+26%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
What 32 hp changes on the road
A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 1.6 THP from 163 hp to 195 hp, with torque from 240 Nm to 302 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.
Gains of this size (+20%) are normal for this kind of engine on pump fuel, with no hardware changes.
What Stage 1 involves on a Peugeot 408
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 163 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 195 hp and 302 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which Peugeot 408 this covers
These figures are for the 1.6 THP as fitted 2010–2022. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
Peugeot 408 remap price and booking
Stage 1 for the Peugeot 408 1.6 THP starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Peugeot 408 engines
More Peugeot tuning
- Peugeot 5008 1.6 HDi — Stage 1 (110hp stock)
- Peugeot 508 1.6 Ehdi — Stage 1 (115hp stock)
- Peugeot 607 2.0 HDi — Stage 1 (109hp stock)
- Peugeot 807 2.0 HDi — Stage 1 (110hp stock)
- Peugeot 1007 1.4 HDi — Stage 1 (68hp stock)
- Peugeot 108 1.0 PureTech — Stage 1 (68hp stock)
- Peugeot 2008 1.2T PureTech — Stage 1 (110hp stock)
- Peugeot 206 1.4 — Stage 1 (75hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning