Skoda Kodiaq 2.0 TSI Stage 1: 180→241hp | DMS Tuned

Skoda Kodiaq 2.0 TSI Stage 1: 180→241hp

Skoda Kodiaq 2.0 TSI Stage 1: 180hp → 241hp, 320→403Nm. ✓ We have run this car on our own dyno — measured sheet on file. Custom DMS calibration written for…

✓ We have run a Skoda Kodiaq on our own dyno

This is not a figure copied from a database. A 2.0 TSI of this exact power variant has been on our rollers, and we hold the DynoRevolt sheet for what it measured. Ask to see it. For before-and-after runs on the same machine, all 86 of ours are published in full on our dyno page — nobody else shows you theirs.

Skoda Kodiaq Stage 1: 180 hp → 241 hp

Factory output for the Skoda Kodiaq 2.0 TSI is 180 hp and 320 Nm. A Stage 1 remap targets 241 hp and 403 Nm — 61 hp (+34%) and 83 Nm (+26%).

Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.

What 61 hp changes on the road

A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 2.0 TSI from 180 hp to 241 hp, with torque from 320 Nm to 403 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.

Gains of this size (+34%) are normal for this kind of engine on pump fuel, with no hardware changes.

What Stage 1 involves on a Skoda Kodiaq

We read the ECU, log the car as it stands, and put it on the dyno to confirm the 180 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.

The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 241 hp and 403 Nm figure and check knock, lambda and temperatures under load.

Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.

Which Skoda Kodiaq this covers

These figures are for the 2.0 TSI as fitted 2017–2021. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.

Skoda Kodiaq remap price and booking

Stage 1 for the Skoda Kodiaq 2.0 TSI starts at €450, including the dyno runs before and after and the stock-file archive.

We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.

Other Skoda Kodiaq engines

More Skoda tuning

More from DMS Tuned

WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning