Volkswagen Amarok 3.0 V6 TDI Stage 1: 258→327hp | DMS Tuned

Volkswagen Amarok 3.0 V6 TDI Stage 1: 258→327hp

Volkswagen Amarok 3.0 V6 TDI Stage 1: 258hp → 327hp, 580→687Nm. Custom DMS calibration written for your car — not an off-the-shelf file. From €450. Athens +…

Volkswagen Amarok Stage 1: 258 hp → 327 hp

Factory output for the Volkswagen Amarok 3.0 V6 TDI is 258 hp and 580 Nm. A Stage 1 remap targets 327 hp and 687 Nm — 69 hp (+27%) and 107 Nm (+18%).

Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.

Where the 107 Nm shows up

On a diesel the useful change is torque, not peak power. Going from 580 Nm to 687 Nm fills in the mid-range, which is where a Volkswagen Amarok actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.

Peak power moves too, 258 hp to 327 hp, but you will feel the 107 Nm far more often than the 69 hp.

What Stage 1 involves on a Volkswagen Amarok

We read the ECU, log the car as it stands, and put it on the dyno to confirm the 258 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.

The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 327 hp and 687 Nm figure and check knock, lambda and temperatures under load.

Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.

Which Volkswagen Amarok this covers

These figures are for the 3.0 V6 TDI as fitted 2016–2022. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.

Volkswagen Amarok remap price and booking

Stage 1 for the Volkswagen Amarok 3.0 V6 TDI starts at €450, including the dyno runs before and after and the stock-file archive.

We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.

Other Volkswagen Amarok engines

More Volkswagen tuning

More from DMS Tuned

WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning