Volkswagen Amarok 3.0 TDI V6 Stage 1: 240→273hp | DMS Tuned

Volkswagen Amarok 3.0 TDI V6 Stage 1: 240→273hp

Volkswagen Amarok 3.0 TDI V6 Stage 1: 240hp → 273hp, 600→685Nm. Custom DMS calibration written for your car — not an off-the-shelf file. From €450. Athens +…

Volkswagen Amarok Stage 1: 240 hp → 273 hp

Factory output for the Volkswagen Amarok 3.0 TDI V6 is 240 hp and 600 Nm. A Stage 1 remap targets 273 hp and 685 Nm — 33 hp (+14%) and 85 Nm (+14%).

Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.

Where the 85 Nm shows up

On a diesel the useful change is torque, not peak power. Going from 600 Nm to 685 Nm fills in the mid-range, which is where a Volkswagen Amarok actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.

Peak power moves too, 240 hp to 273 hp, but you will feel the 85 Nm far more often than the 33 hp.

What Stage 1 involves on a Volkswagen Amarok

We read the ECU, log the car as it stands, and put it on the dyno to confirm the 240 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.

The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 273 hp and 685 Nm figure and check knock, lambda and temperatures under load.

Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.

Which Volkswagen Amarok this covers

These figures are for the 3.0 TDI V6 as fitted 2023 onwards. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.

Volkswagen Amarok remap price and booking

Stage 1 for the Volkswagen Amarok 3.0 TDI V6 starts at €450, including the dyno runs before and after and the stock-file archive.

We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.

Other Volkswagen Amarok engines

More Volkswagen tuning

More from DMS Tuned

WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning