Jeep Wrangler 2.8 CRD Stage 1: 200→242hp
Jeep Wrangler 2.8 CRD Stage 1: 200hp → 242hp, 410→527Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens +…
Jeep Wrangler Stage 1: 200 hp → 242 hp
Factory output for the Jeep Wrangler 2.8 CRD is 200 hp and 410 Nm. A Stage 1 remap targets 242 hp and 527 Nm — 42 hp (+21%) and 117 Nm (+29%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
Where the 117 Nm shows up
On a diesel the useful change is torque, not peak power. Going from 410 Nm to 527 Nm fills in the mid-range, which is where a Jeep Wrangler actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.
Peak power moves too, 200 hp to 242 hp, but you will feel the 117 Nm far more often than the 42 hp.
What Stage 1 involves on a Jeep Wrangler
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 200 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 242 hp and 527 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which Jeep Wrangler this covers
These figures are for the 2.8 CRD as fitted 2018 onwards. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
Jeep Wrangler remap price and booking
Stage 1 for the Jeep Wrangler 2.8 CRD starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Jeep Wrangler engines
- Jeep Wrangler 28Crd — Stage 1 (177hp stock)
- Jeep Wrangler 3.6 V6 — Stage 1 (284hp stock)
- Jeep Wrangler 3.8 V6 — Stage 1 (200hp stock)
- Jeep Wrangler 2.0T — Stage 1 (272hp stock)
- Jeep Wrangler 2.0T 4Xe — Stage 1 (380hp stock)
- Jeep Wrangler 2.2 Mjet — Stage 1 (200hp stock)
More Jeep tuning
- Jeep Avenger 1 1.2 PureTech GPF — Stage 1 (100hp stock)
- Jeep Cherokee 2.8 CRD — Stage 1 (158hp stock)
- Jeep Commander 22Crd — Stage 1 (136hp stock)
- Jeep Compass 2.0 CRD — Stage 1 (140hp stock)
- Jeep Gladiator 3.0 CRD — Stage 1 (264hp stock)
- Jeep Grand Cherokee 3.0 CRD — Stage 1 (211hp stock)
- Jeep Patriot 2.0 CRD — Stage 1 (136hp stock)
- Jeep Renegade 1.4 Multiair — Stage 1 (136hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning