Jeep Grand Commander 2.0T Stage 1: 234→310hp
Jeep Grand Commander 2.0T Stage 1: 234hp → 310hp, 350→460Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens +…
Jeep Grand Commander Stage 1: 234 hp → 310 hp
Factory output for the Jeep Grand Commander 2.0T is 234 hp and 350 Nm. A Stage 1 remap targets 310 hp and 460 Nm — 76 hp (+32%) and 110 Nm (+31%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
What 76 hp changes on the road
A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 2.0T from 234 hp to 310 hp, with torque from 350 Nm to 460 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.
Gains of this size (+32%) are normal for this kind of engine on pump fuel, with no hardware changes.
What Stage 1 involves on a Jeep Grand Commander
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 234 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 310 hp and 460 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Jeep Grand Commander remap price and booking
Stage 1 for the Jeep Grand Commander 2.0T starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Jeep Grand Commander engines
More Jeep tuning
- Jeep Liberty 2.8 CRD — Stage 1 (160hp stock)
- Jeep Patriot 2.0 CRD — Stage 1 (136hp stock)
- Jeep Renegade 1.4 Multiair — Stage 1 (136hp stock)
- Jeep Wrangler 28Crd — Stage 1 (177hp stock)
- Jeep Avenger 1.2 PureTech — Stage 1 (100hp stock)
- Jeep Avenger 1 1.2 PureTech GPF — Stage 1 (100hp stock)
- Jeep Cherokee 2.8 CRD — Stage 1 (158hp stock)
- Jeep Commander 22Crd — Stage 1 (136hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning