Jeep Commander 30Crd Stage 1: 211→270hp | DMS Tuned

Jeep Commander 30Crd Stage 1: 211→270hp

Jeep Commander 30Crd Stage 1: 211hp → 270hp, 510→607Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens +…

Jeep Commander Stage 1: 211 hp → 270 hp

Factory output for the Jeep Commander 30Crd is 211 hp and 510 Nm. A Stage 1 remap targets 270 hp and 607 Nm — 59 hp (+28%) and 97 Nm (+19%).

Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.

Where the 97 Nm shows up

On a diesel the useful change is torque, not peak power. Going from 510 Nm to 607 Nm fills in the mid-range, which is where a Jeep Commander actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.

Peak power moves too, 211 hp to 270 hp, but you will feel the 97 Nm far more often than the 59 hp.

What Stage 1 involves on a Jeep Commander

We read the ECU, log the car as it stands, and put it on the dyno to confirm the 211 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.

The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 270 hp and 607 Nm figure and check knock, lambda and temperatures under load.

Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.

Which Jeep Commander this covers

These figures are for the 30Crd as fitted 2006 onwards. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.

Jeep Commander remap price and booking

Stage 1 for the Jeep Commander 30Crd starts at €450, including the dyno runs before and after and the stock-file archive.

We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.

Other Jeep Commander engines

More Jeep tuning

More from DMS Tuned

WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning