Jeep Commander 2.2 CRD Stage 1: 136→180hp
Jeep Commander 2.2 CRD Stage 1: 136hp → 180hp, 320→380Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens +…
Jeep Commander Stage 1: 136 hp → 180 hp
Factory output for the Jeep Commander 2.2 CRD is 136 hp and 320 Nm. A Stage 1 remap targets 180 hp and 380 Nm — 44 hp (+32%) and 60 Nm (+19%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
Where the 60 Nm shows up
On a diesel the useful change is torque, not peak power. Going from 320 Nm to 380 Nm fills in the mid-range, which is where a Jeep Commander actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.
Peak power moves too, 136 hp to 180 hp, but you will feel the 60 Nm far more often than the 44 hp.
What Stage 1 involves on a Jeep Commander
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 136 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 180 hp and 380 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Jeep Commander remap price and booking
Stage 1 for the Jeep Commander 2.2 CRD starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Jeep Commander engines
- Jeep Commander 2.2 CRDi — Stage 1 (136hp stock)
- Jeep Commander 22Crd — Stage 1 (136hp stock)
- Jeep Commander 3.0 CRD — Stage 1 (211hp stock)
- Jeep Commander 3.0 CRD — Stage 1 (218hp stock)
- Jeep Commander 30Crd — Stage 1 (211hp stock)
- Jeep Commander 30Crd — Stage 1 (218hp stock)
- Jeep Commander 3.7 V8 — Stage 1 (210hp stock)
- Jeep Commander 4.7 V8 — Stage 1 (235hp stock)
- Jeep Commander 4.7 V8 — Stage 1 (305hp stock)
- Jeep Commander 5.7 Hemi V8 — Stage 1 (330hp stock)
More Jeep tuning
- Jeep Compass 2.0 CRD — Stage 1 (140hp stock)
- Jeep Gladiator 3.0 CRD — Stage 1 (264hp stock)
- Jeep Grand Cherokee 3.0 CRD — Stage 1 (211hp stock)
- Jeep Grand Commander 2.0T — Stage 1 (234hp stock)
- Jeep Liberty 2.8 CRD — Stage 1 (160hp stock)
- Jeep Patriot 2.0 CRD — Stage 1 (136hp stock)
- Jeep Renegade 1.4 Multiair — Stage 1 (136hp stock)
- Jeep Wrangler 28Crd — Stage 1 (177hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning