Nissan Cabstar Nt400 3.0 dCi Stage 1: 130→186hp | DMS Tuned

Nissan Cabstar Nt400 3.0 dCi Stage 1: 130→186hp

Nissan Cabstar Nt400 3.0 dCi Stage 1: 130hp → 186hp, 300→435Nm. Custom DMS calibration written for your car — not an off-the-shelf file. From €450. Athens +…

Nissan Cabstar Nt400 Stage 1: 130 hp → 186 hp

Factory output for the Nissan Cabstar Nt400 3.0 dCi is 130 hp and 300 Nm. A Stage 1 remap targets 186 hp and 435 Nm — 56 hp (+43%) and 135 Nm (+45%).

Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.

What 56 hp changes on the road

A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 3.0 dCi from 130 hp to 186 hp, with torque from 300 Nm to 435 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.

Gains of this size (+43%) are normal for this kind of engine on pump fuel, with no hardware changes.

What Stage 1 involves on a Nissan Cabstar Nt400

We read the ECU, log the car as it stands, and put it on the dyno to confirm the 130 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.

The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 186 hp and 435 Nm figure and check knock, lambda and temperatures under load.

Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.

Which Nissan Cabstar Nt400 this covers

These figures are for the 3.0 dCi as fitted 2016 onwards. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.

Nissan Cabstar Nt400 remap price and booking

Stage 1 for the Nissan Cabstar Nt400 3.0 dCi starts at €450, including the dyno runs before and after and the stock-file archive.

We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.

Other Nissan Cabstar Nt400 engines

More Nissan tuning

More from DMS Tuned

WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning