Nissan Cube 1.5 dCi Stage 1: 85→112hp
Nissan Cube 1.5 dCi Stage 1: 85hp → 112hp, 200→264Nm. Custom DMS calibration written for your car — not an off-the-shelf file. From €450. Athens + remote.…
Nissan Cube Stage 1: 85 hp → 112 hp
Factory output for the Nissan Cube 1.5 dCi is 85 hp and 200 Nm. A Stage 1 remap targets 112 hp and 264 Nm — 27 hp (+32%) and 64 Nm (+32%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
What 27 hp changes on the road
A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 1.5 dCi from 85 hp to 112 hp, with torque from 200 Nm to 264 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.
Gains of this size (+32%) are normal for this kind of engine on pump fuel, with no hardware changes.
What Stage 1 involves on a Nissan Cube
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 85 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 112 hp and 264 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which Nissan Cube this covers
These figures are for the 1.5 dCi as fitted 2010–2012. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
Nissan Cube remap price and booking
Stage 1 for the Nissan Cube 1.5 dCi starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Nissan Cube engines
More Nissan tuning
- Nissan Evalia 1.5 dCi — Stage 1 (90hp stock)
- Nissan GT-R 3.8 V6 Turbo — Stage 1 (485hp stock)
- Nissan Gtr 38I — Stage 1 (485hp stock)
- Nissan Interstar 2.5 dCi — Stage 1 (100hp stock)
- Nissan Juke 1.2 DIG T — Stage 1 (115hp stock)
- Nissan Micra 1.2 16V — Stage 1 (80hp stock)
- Nissan Murano 2.5 dCi — Stage 1 (190hp stock)
- Nissan Navara 2.5 dCi — Stage 1 (174hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning