Mazda Mazda 3 2.0 MZR CD Stage 1: 143→178hp | DMS Tuned

Mazda Mazda 3 2.0 MZR CD Stage 1: 143→178hp

Mazda Mazda 3 2.0 MZR CD Stage 1: 143hp → 178hp, 360→414Nm. Custom DMS calibration written for your car — not an off-the-shelf file. From €450. Athens +…

Mazda Mazda 3 Stage 1: 143 hp → 178 hp

Factory output for the Mazda Mazda 3 2.0 MZR CD is 143 hp and 360 Nm. A Stage 1 remap targets 178 hp and 414 Nm — 35 hp (+24%) and 54 Nm (+15%).

Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.

Where the 54 Nm shows up

On a diesel the useful change is torque, not peak power. Going from 360 Nm to 414 Nm fills in the mid-range, which is where a Mazda Mazda 3 actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.

Peak power moves too, 143 hp to 178 hp, but you will feel the 54 Nm far more often than the 35 hp.

What Stage 1 involves on a Mazda Mazda 3

We read the ECU, log the car as it stands, and put it on the dyno to confirm the 143 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.

The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 178 hp and 414 Nm figure and check knock, lambda and temperatures under load.

Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.

Which Mazda Mazda 3 this covers

These figures are for the 2.0 MZR CD as fitted 2003–2009. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.

Mazda Mazda 3 remap price and booking

Stage 1 for the Mazda Mazda 3 2.0 MZR CD starts at €450, including the dyno runs before and after and the stock-file archive.

We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.

Other Mazda Mazda 3 engines

More Mazda tuning

More from DMS Tuned

WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning