Mazda 3 1.6 Citd Stage 1: 110→140hp
Mazda 3 1.6 Citd Stage 1: 110hp → 140hp, 245→315Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens + remote.…
Mazda 3 Stage 1: 110 hp → 140 hp
Factory output for the Mazda 3 1.6 Citd is 110 hp and 245 Nm. A Stage 1 remap targets 140 hp and 315 Nm — 30 hp (+27%) and 70 Nm (+29%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
Where the 70 Nm shows up
On a diesel the useful change is torque, not peak power. Going from 245 Nm to 315 Nm fills in the mid-range, which is where a Mazda 3 actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.
Peak power moves too, 110 hp to 140 hp, but you will feel the 70 Nm far more often than the 30 hp.
What Stage 1 involves on a Mazda 3
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 110 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 140 hp and 315 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Mazda 3 remap price and booking
Stage 1 for the Mazda 3 1.6 Citd starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Mazda 3 engines
- Mazda 3 1.6 Citd — Stage 1 (115hp stock)
- Mazda 3 1.6 Citd — Stage 1 (90hp stock)
- Mazda 3 1.6i 16v — Stage 1 (105hp stock)
- Mazda 3 1.8 Skyactiv-d — Stage 1 (115hp stock)
- Mazda 3 2.0 Citd — Stage 1 (143hp stock)
- Mazda 3 2.0 Skyactiv-g — Stage 1 (120hp stock)
- Mazda 3 2.0 Skyactiv-g — Stage 1 (122hp stock)
- Mazda 3 2.0 Skyactiv-g — Stage 1 (165hp stock)
- Mazda 3 2.2 Citd — Stage 1 (150hp stock)
- Mazda 3 2.2 Citd — Stage 1 (185hp stock)
More Mazda tuning
- Mazda 5 1.6 Citd — Stage 1 (115hp stock)
- Mazda 6 1.8i 16v — Stage 1 (120hp stock)
- Mazda Bt 50 2.5 MZR CD — Stage 1 (143hp stock)
- Mazda Cx 3 1.5 SkyActiv D — Stage 1 (105hp stock)
- Mazda Cx 30 1.8 SkyActiv D — Stage 1 (116hp stock)
- Mazda Cx 5 2.2 SkyActiv D — Stage 1 (150hp stock)
- Mazda Cx 60 2.5 E SkyActiv Phev 44 — Stage 1 (327hp stock)
- Mazda Cx 7 2.2 Cdvi — Stage 1 (163hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning