Mazda Cx 30 1.8 SkyActiv D Stage 1: 116→152hp | DMS Tuned

Mazda Cx 30 1.8 SkyActiv D Stage 1: 116→152hp

Mazda Cx 30 1.8 SkyActiv D Stage 1: 116hp → 152hp, 270→324Nm. Custom DMS calibration written for your car — not an off-the-shelf file. From €450. Athens +…

Mazda Cx 30 Stage 1: 116 hp → 152 hp

Factory output for the Mazda Cx 30 1.8 SkyActiv D is 116 hp and 270 Nm. A Stage 1 remap targets 152 hp and 324 Nm — 36 hp (+31%) and 54 Nm (+20%).

Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.

Where the 54 Nm shows up

On a diesel the useful change is torque, not peak power. Going from 270 Nm to 324 Nm fills in the mid-range, which is where a Mazda Cx 30 actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.

Peak power moves too, 116 hp to 152 hp, but you will feel the 54 Nm far more often than the 36 hp.

What Stage 1 involves on a Mazda Cx 30

We read the ECU, log the car as it stands, and put it on the dyno to confirm the 116 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.

The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 152 hp and 324 Nm figure and check knock, lambda and temperatures under load.

Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.

Which Mazda Cx 30 this covers

These figures are for the 1.8 SkyActiv D as fitted 2019–2024. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.

Mazda Cx 30 remap price and booking

Stage 1 for the Mazda Cx 30 1.8 SkyActiv D starts at €450, including the dyno runs before and after and the stock-file archive.

We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.

Other Mazda Cx 30 engines

More Mazda tuning

More from DMS Tuned

WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning