Jeep Cherokee 2.0T Stage 1: 272→300hp
Jeep Cherokee 2.0T Stage 1: 272hp → 300hp, 400→450Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens + remote.…
Jeep Cherokee Stage 1: 272 hp → 300 hp
Factory output for the Jeep Cherokee 2.0T is 272 hp and 400 Nm. A Stage 1 remap targets 300 hp and 450 Nm — 28 hp (+10%) and 50 Nm (+13%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
What 28 hp changes on the road
A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 2.0T from 272 hp to 300 hp, with torque from 400 Nm to 450 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.
Gains of this size (+10%) are normal for this kind of engine on pump fuel, with no hardware changes.
What Stage 1 involves on a Jeep Cherokee
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 272 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 300 hp and 450 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Jeep Cherokee remap price and booking
Stage 1 for the Jeep Cherokee 2.0T starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Jeep Cherokee engines
- Jeep Cherokee 2.2 CRD — Stage 1 (185hp stock)
- Jeep Cherokee 2.2 CRD — Stage 1 (200hp stock)
- Jeep Cherokee 2.2 Mjet — Stage 1 (185hp stock)
- Jeep Cherokee 2.2 Mjet — Stage 1 (200hp stock)
- Jeep Cherokee 2.5 CRD — Stage 1 (143hp stock)
- Jeep Cherokee 2.5 TD — Stage 1 (115hp stock)
- Jeep Cherokee 2.7 CRD — Stage 1 (163hp stock)
- Jeep Cherokee 2.8 CRD — Stage 1 (150hp stock)
- Jeep Cherokee 2.8 CRD — Stage 1 (158hp stock)
- Jeep Cherokee 2.8 CRD — Stage 1 (163hp stock)
More Jeep tuning
- Jeep Commander 22Crd — Stage 1 (136hp stock)
- Jeep Compass 2.0 CRD — Stage 1 (140hp stock)
- Jeep Gladiator 3.0 CRD — Stage 1 (264hp stock)
- Jeep Grand Cherokee 3.0 CRD — Stage 1 (211hp stock)
- Jeep Grand Commander 2.0T — Stage 1 (234hp stock)
- Jeep Liberty 2.8 CRD — Stage 1 (160hp stock)
- Jeep Patriot 2.0 CRD — Stage 1 (136hp stock)
- Jeep Renegade 1.4 Multiair — Stage 1 (136hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning