Ford Everest 3.0d Stage 1: 240→270hp
Ford Everest 3.0d Stage 1: 240hp → 270hp, 600→680Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens + remote.…
Ford Everest Stage 1: 240 hp → 270 hp
Factory output for the Ford Everest 3.0d is 240 hp and 600 Nm. A Stage 1 remap targets 270 hp and 680 Nm — 30 hp (+13%) and 80 Nm (+13%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
Where the 80 Nm shows up
On a diesel the useful change is torque, not peak power. Going from 600 Nm to 680 Nm fills in the mid-range, which is where a Ford Everest actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.
Peak power moves too, 240 hp to 270 hp, but you will feel the 80 Nm far more often than the 30 hp.
What Stage 1 involves on a Ford Everest
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 240 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 270 hp and 680 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Ford Everest remap price and booking
Stage 1 for the Ford Everest 3.0d starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Ford Everest engines
- Ford Everest 3.2 TDCi — Stage 1 (195hp stock)
- Ford Everest 2.0 Ecoblue — Stage 1 (214hp stock)
- Ford Everest 2.0d — Stage 1 (170hp stock)
- Ford Everest 2.0d — Stage 1 (209hp stock)
- Ford Everest 2.0T EcoBoost — Stage 1 (245hp stock)
- Ford Everest 2.3T EcoBoost — Stage 1 (275hp stock)
More Ford tuning
- Ford Evos 2.0T EcoBoost — Stage 1 (240hp stock)
- Ford Excursion 6.0 V8 — Stage 1 (325hp stock)
- Ford Expedition 3.5T V6 EcoBoost — Stage 1 (365hp stock)
- Ford Explorer 4.0 V8 — Stage 1 (210hp stock)
- Ford F-150 4.6 V8 — Stage 1 (248hp stock)
- Ford F-250 5.4 V8 — Stage 1 (320hp stock)
- Ford Fiesta 1.25i 16v — Stage 1 (70hp stock)
- Ford Figo 1.5 TDCi — Stage 1 (100hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning