Fiat Panda 10I Hybrid 022020 Stage 1: 70→81hp
Fiat Panda 10I Hybrid 022020 Stage 1: 70hp → 81hp. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens + remote.…
Fiat Panda Stage 1: 70 hp → 81 hp
Factory output for the Fiat Panda 10I Hybrid 022020 is 70 hp. A Stage 1 remap targets 81 hp — a gain of 11 hp (+16%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
What 11 hp changes on the road
A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 10I Hybrid 022020 from 70 hp to 81 hp sharpens throttle response and shortens the gap between asking for power and getting it.
Gains of this size (+16%) are normal for this kind of engine on pump fuel, with no hardware changes.
What Stage 1 involves on a Fiat Panda
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 70 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 81 hp figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which Fiat Panda this covers
These figures are for the 10I Hybrid 022020 as fitted 2017–2023. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
Fiat Panda remap price and booking
Stage 1 for the Fiat Panda 10I Hybrid 022020 starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Fiat Panda engines
- Fiat Panda 1.3 JTDm — Stage 1 (70hp stock)
- Fiat Panda 1.3 MJT 4X4 — Stage 1 (80hp stock)
- Fiat Panda 1.3 MJT — Stage 1 (95hp stock)
- Fiat Panda 1.3 MultiJet — Stage 1 (95hp stock)
- Fiat Panda 0.9 Twinair — Stage 1 (85hp stock)
- Fiat Panda 0.9 Twinair Natural Power — Stage 1 (80hp stock)
- Fiat Panda 1.0 Flyrefly — Stage 1 (69hp stock)
More Fiat tuning
- Fiat 124 Spider 1.4 Multiair — Stage 1 (140hp stock)
- Fiat 500 595 695 0.9 Twinair — Stage 1 (85hp stock)
- Fiat 500L 0.9 Twinair — Stage 1 (85hp stock)
- Fiat 500X 1.3 MultiJet — Stage 1 (95hp stock)
- Fiat Brava 1.6 JTDm — Stage 1 (105hp stock)
- Fiat Bravo 1.9 JTD — Stage 1 (100hp stock)
- Fiat Croma 1.9 JTD — Stage 1 (115hp stock)
- Fiat Doblo 1.3 JTD — Stage 1 (69hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning