Fiat 500X 1.6 MultiJet Stage 1: 130→158hp
Fiat 500X 1.6 MultiJet Stage 1: 130hp → 158hp, 320→384Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens +…
Fiat 500X Stage 1: 130 hp → 158 hp
Factory output for the Fiat 500X 1.6 MultiJet is 130 hp and 320 Nm. A Stage 1 remap targets 158 hp and 384 Nm — 28 hp (+22%) and 64 Nm (+20%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
What 28 hp changes on the road
A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 1.6 MultiJet from 130 hp to 158 hp, with torque from 320 Nm to 384 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.
Gains of this size (+22%) are normal for this kind of engine on pump fuel, with no hardware changes.
What Stage 1 involves on a Fiat 500X
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 130 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 158 hp and 384 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which Fiat 500X this covers
These figures are for the 1.6 MultiJet as fitted 2018 onwards. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
Fiat 500X remap price and booking
Stage 1 for the Fiat 500X 1.6 MultiJet starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Fiat 500X engines
- Fiat 500X 2.0 MJT — Stage 1 (150hp stock)
- Fiat 500X 2.0 MultiJet — Stage 1 (140hp stock)
- Fiat 500X 0.9 Twinair — Stage 1 (85hp stock)
- Fiat 500X 1.0 GSE — Stage 1 (130hp stock)
- Fiat 500X 1.0 GSE T3 — Stage 1 (120hp stock)
- Fiat 500X 1.3 GSE — Stage 1 (160hp stock)
- Fiat 500X 1.3 GSE T4 — Stage 1 (150hp stock)
- Fiat 500X 1.3 MJT — Stage 1 (95hp stock)
- Fiat 500X 1.3 MultiJet — Stage 1 (95hp stock)
- Fiat 500X 1.4 Multiair — Stage 1 (140hp stock)
More Fiat tuning
- Fiat Brava 1.6 JTDm — Stage 1 (105hp stock)
- Fiat Bravo 1.9 JTD — Stage 1 (100hp stock)
- Fiat Croma 1.9 JTD — Stage 1 (115hp stock)
- Fiat Doblo 1.3 JTD — Stage 1 (69hp stock)
- Fiat Ducato 2.0 JTD — Stage 1 (84hp stock)
- Fiat Fiorino 1.3 JTD — Stage 1 (75hp stock)
- Fiat Freemont 2.0 Mjet — Stage 1 (136hp stock)
- Fiat Fullback 2.4D — Stage 1 (154hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning