Fiat 500X 1.3 MultiJet Stage 1: 95→124hp
Fiat 500X 1.3 MultiJet Stage 1: 95hp → 124hp, 200→254Nm. Custom DMS calibration written for your car — not an off-the-shelf file. From €450. Athens +…
Fiat 500X Stage 1: 95 hp → 124 hp
Factory output for the Fiat 500X 1.3 MultiJet is 95 hp and 200 Nm. A Stage 1 remap targets 124 hp and 254 Nm — 29 hp (+31%) and 54 Nm (+27%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
What 29 hp changes on the road
A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 1.3 MultiJet from 95 hp to 124 hp, with torque from 200 Nm to 254 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.
Gains of this size (+31%) are normal for this kind of engine on pump fuel, with no hardware changes.
What Stage 1 involves on a Fiat 500X
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 95 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 124 hp and 254 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which Fiat 500X this covers
These figures are for the 1.3 MultiJet as fitted 2014–2018. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
Fiat 500X remap price and booking
Stage 1 for the Fiat 500X 1.3 MultiJet starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Fiat 500X engines
- Fiat 500X 1.4 Multiair — Stage 1 (140hp stock)
- Fiat 500X 1.4 Multiair — Stage 1 (170hp stock)
- Fiat 500X 1.4T Multiair — Stage 1 (120hp stock)
- Fiat 500X 1.5 T Firefly — Stage 1 (130hp stock)
- Fiat 500X 1.6 E Torq — Stage 1 (110hp stock)
- Fiat 500X 1.6 MJT — Stage 1 (120hp stock)
- Fiat 500X 1.6 MultiJet — Stage 1 (120hp stock)
- Fiat 500X 1.6 MultiJet — Stage 1 (130hp stock)
- Fiat 500X 2.0 MJT — Stage 1 (150hp stock)
- Fiat 500X 2.0 MultiJet — Stage 1 (140hp stock)
More Fiat tuning
- Fiat Brava 1.6 JTDm — Stage 1 (105hp stock)
- Fiat Bravo 1.9 JTD — Stage 1 (100hp stock)
- Fiat Croma 1.9 JTD — Stage 1 (115hp stock)
- Fiat Cronos 1.8 E-torq — Stage 1 (130hp stock)
- Fiat Doblo 1.3 JTD — Stage 1 (69hp stock)
- Fiat Ducato 2.0 JTD — Stage 1 (84hp stock)
- Fiat Fiorino 1.3 JTD — Stage 1 (75hp stock)
- Fiat Freemont 2.0 Mjet — Stage 1 (136hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning