Fiat 500 X 1.4T Multiair Stage 1: 140→170hp | DMS Tuned

Fiat 500 X 1.4T Multiair Stage 1: 140→170hp

Fiat 500 X 1.4T Multiair Stage 1: 140hp → 170hp, 230→300Nm. ✓ Run on our own dyno — real before/after sheet on file. Validated DMS calibration, proven on…

✓ We have run a Fiat 500 X like this on our own dyno

This is not a figure copied from a database. We hold a real before/after DynoRevolt sheet for the 1.4T Multiair — the 140 hp baseline and the Stage 1 result, measured in our own workshop, not estimated. Ask to see the run for your car.

Fiat 500 X Stage 1: 140 hp → 170 hp

Factory output for the Fiat 500 X 1.4T Multiair is 140 hp and 230 Nm. A Stage 1 remap targets 170 hp and 300 Nm — 30 hp (+21%) and 70 Nm (+30%).

Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.

What 30 hp changes on the road

A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 1.4T Multiair from 140 hp to 170 hp, with torque from 230 Nm to 300 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.

Gains of this size (+21%) are normal for this kind of engine on pump fuel, with no hardware changes.

What Stage 1 involves on a Fiat 500 X

We read the ECU, log the car as it stands, and put it on the dyno to confirm the 140 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.

The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 170 hp and 300 Nm figure and check knock, lambda and temperatures under load.

Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.

Fiat 500 X remap price and booking

Stage 1 for the Fiat 500 X 1.4T Multiair starts at €450, including the dyno runs before and after and the stock-file archive.

We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.

Other Fiat 500 X engines

More Fiat tuning

More from DMS Tuned

WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning