Dodge Caliber 2.4T Stage 1: 295→330hp
Dodge Caliber 2.4T Stage 1: 295hp → 330hp, 363→420Nm. ✓ We have run this car on our own dyno — measured sheet on file. Custom DMS calibration written for…
✓ We have run a Dodge Caliber on our own dyno
This is not a figure copied from a database. A 2.4T of this exact power variant has been on our rollers, and we hold the DynoRevolt sheet for what it measured. Ask to see it. For before-and-after runs on the same machine, all 86 of ours are published in full on our dyno page — nobody else shows you theirs.
Dodge Caliber Stage 1: 295 hp → 330 hp
Factory output for the Dodge Caliber 2.4T is 295 hp and 363 Nm. A Stage 1 remap targets 330 hp and 420 Nm — 35 hp (+12%) and 57 Nm (+16%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
What 35 hp changes on the road
A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 2.4T from 295 hp to 330 hp, with torque from 363 Nm to 420 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.
Gains of this size (+12%) are normal for this kind of engine on pump fuel, with no hardware changes.
What Stage 1 involves on a Dodge Caliber
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 295 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 330 hp and 420 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Dodge Caliber remap price and booking
Stage 1 for the Dodge Caliber 2.4T starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Dodge Caliber engines
- Dodge Caliber 2.0 CRD — Stage 1 (140hp stock)
- Dodge Caliber 2.0i — Stage 1 (158hp stock)
- Dodge Caliber 2.2 CRD — Stage 1 (163hp stock)
- Dodge Caliber 2.4 Srt4 — Stage 1 (295hp stock)
- Dodge Caliber 2.4i — Stage 1 (172hp stock)
More Dodge tuning
- Dodge Caravan 3.3 V6 — Stage 1 (180hp stock)
- Dodge Challenger 3.5 V6 — Stage 1 (250hp stock)
- Dodge Charger 2.7 V6 — Stage 1 (190hp stock)
- Dodge Dakota 3.7 V6 — Stage 1 (210hp stock)
- Dodge Dart 1.4T Multiair — Stage 1 (160hp stock)
- Dodge Durango 3.6 V6 — Stage 1 (290hp stock)
- Dodge Journey 2.0 CRD — Stage 1 (140hp stock)
- Dodge Magnum 3.5 V6 — Stage 1 (254hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning