Audi Q2 35 TFSI (1.5t) Stage 1: 150→185hp
Audi Q2 35 TFSI (1.5t) Stage 1: 150hp → 185hp, 250→310Nm. ✓ We have run this car on our own dyno — measured sheet on file. Custom DMS calibration written…
✓ We have run an Audi Q2 on our own dyno
This is not a figure copied from a database. A 35 TFSI (1.5t) of this exact power variant has been on our rollers, and we hold the DynoRevolt sheet for what it measured. Ask to see it. For before-and-after runs on the same machine, all 86 of ours are published in full on our dyno page — nobody else shows you theirs.
Audi Q2 Stage 1: 150 hp → 185 hp
Factory output for the Audi Q2 35 TFSI (1.5t) is 150 hp and 250 Nm. A Stage 1 remap targets 185 hp and 310 Nm — 35 hp (+23%) and 60 Nm (+24%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
What 35 hp changes on the road
A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 35 TFSI (1.5t) from 150 hp to 185 hp, with torque from 250 Nm to 310 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.
Gains of this size (+23%) are normal for this kind of engine on pump fuel, with no hardware changes.
What Stage 1 involves on an Audi Q2
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 150 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 185 hp and 310 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Audi Q2 remap price and booking
Stage 1 for the Audi Q2 35 TFSI (1.5t) starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Audi Q2 engines
- Audi Q2 40 TFSI (2.0t) — Stage 1 (190hp stock)
- Audi Q2 SQ2 50 TFSI 2.0T 2021 — Stage 1 (300hp stock)
- Audi Q2 SQ2 50 TFSI 2.0T — Stage 1 (300hp stock)
- Audi Q2 SQ2 50 TFSI 2.0T — Stage 1 (310hp stock)
- Audi Q2 1.0 TFSI — Stage 1 (116hp stock)
- Audi Q2 1.4 TFSI — Stage 1 (150hp stock)
- Audi Q2 1.6 TDI — Stage 1 (116hp stock)
- Audi Q2 2.0 TDI — Stage 1 (150hp stock)
- Audi Q2 2.0 TDI — Stage 1 (190hp stock)
- Audi Q2 2.0 TFSI — Stage 1 (190hp stock)
More Audi tuning
- Audi Q3 1.4 TFSI — Stage 1 (150hp stock)
- Audi Q5 2.0 TDI — Stage 1 (136hp stock)
- Audi Q7 3.0 TDI — Stage 1 (211hp stock)
- Audi Q8 50 TDI (3.0d) — Stage 1 (286hp stock)
- Audi R8 4.2 V8 — Stage 1 (420hp stock)
- Audi RS3 25 TFSI — Stage 1 (340hp stock)
- Audi RS4 2.7 V6 Biturbo — Stage 1 (380hp stock)
- Audi RS5 4.2 FSI — Stage 1 (450hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning