Toyota Land Cruiser 2.8D Stage 1: 204→235hp
Toyota Land Cruiser 2.8D Stage 1: 204hp → 235hp, 500→557Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens +…
Toyota Land Cruiser Stage 1: 204 hp → 235 hp
Factory output for the Toyota Land Cruiser 2.8D is 204 hp and 500 Nm. A Stage 1 remap targets 235 hp and 557 Nm — 31 hp (+15%) and 57 Nm (+11%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
Where the 57 Nm shows up
On a diesel the useful change is torque, not peak power. Going from 500 Nm to 557 Nm fills in the mid-range, which is where a Toyota Land Cruiser actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.
Peak power moves too, 204 hp to 235 hp, but you will feel the 57 Nm far more often than the 31 hp.
What Stage 1 involves on a Toyota Land Cruiser
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 204 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 235 hp and 557 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which Toyota Land Cruiser this covers
These figures are for the 2.8D as fitted 2018–2022. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
Toyota Land Cruiser remap price and booking
Stage 1 for the Toyota Land Cruiser 2.8D starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Toyota Land Cruiser engines
- Toyota Land Cruiser 3.0 D4D — Stage 1 (166hp stock)
- Toyota Land Cruiser 3.0 D4D — Stage 1 (173hp stock)
- Toyota Land Cruiser 3.0 D4D — Stage 1 (190hp stock)
- Toyota Land Cruiser 4.5 V8 D4D — Stage 1 (286hp stock)
- Toyota Land Cruiser 2.8 D4D — Stage 1 (177hp stock)
- Toyota Land Cruiser 2.8D — Stage 1 (204hp stock)
More Toyota tuning
- Toyota Proace Verso City 1.6 D4D — Stage 1 (90hp stock)
- Toyota Rav4 2.2 D4D — Stage 1 (136hp stock)
- Toyota Supra A90 2.0T — Stage 1 (258hp stock)
- Toyota Supra Gr 2.0T — Stage 1 (184hp stock)
- Toyota Urban Cruiser 1.4 D4D — Stage 1 (90hp stock)
- Toyota Verso 2.0 D4D — Stage 1 (126hp stock)
- Toyota Verso S 1.4 D4D — Stage 1 (90hp stock)
- Toyota Yaris 1.5 NA — Stage 1 (111hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning