Renault Master 3.0 dCi Stage 1: 136→172hp
Renault Master 3.0 dCi Stage 1: 136hp → 172hp, 320→386Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens +…
Renault Master Stage 1: 136 hp → 172 hp
Factory output for the Renault Master 3.0 dCi is 136 hp and 320 Nm. A Stage 1 remap targets 172 hp and 386 Nm — 36 hp (+26%) and 66 Nm (+21%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
What 36 hp changes on the road
A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 3.0 dCi from 136 hp to 172 hp, with torque from 320 Nm to 386 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.
Gains of this size (+26%) are normal for this kind of engine on pump fuel, with no hardware changes.
What Stage 1 involves on a Renault Master
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 136 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 172 hp and 386 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which Renault Master this covers
These figures are for the 3.0 dCi as fitted 1997–2010. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
Renault Master remap price and booking
Stage 1 for the Renault Master 3.0 dCi starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Renault Master engines
- Renault Master 3.0 dCi — Stage 1 (156hp stock)
- Renault Master 1.9 dCi — Stage 1 (82hp stock)
- Renault Master 2.0 dCi — Stage 1 (120hp stock)
- Renault Master 2.2 dCi — Stage 1 (114hp stock)
- Renault Master 2.2 dCi — Stage 1 (90hp stock)
- Renault Master 2.3 Bluedci — Stage 1 (130hp stock)
- Renault Master 2.3 Bluedci — Stage 1 (150hp stock)
- Renault Master 2.3 Bluedci — Stage 1 (165hp stock)
- Renault Master 2.3 Bluedci — Stage 1 (180hp stock)
- Renault Master 2.3 dCi — Stage 1 (110hp stock)
More Renault tuning
- Renault Maxity 2.5 dCi — Stage 1 (110hp stock)
- Renault Megane 1.5 dCi — Stage 1 (82hp stock)
- Renault Megane RS 2.0T — Stage 1 (265hp stock)
- Renault Modus 1.2 TCe — Stage 1 (88hp stock)
- Renault Alaskan 2.3 dCi BI Turbo — Stage 1 (160hp stock)
- Renault Arkana 1.3 TCe — Stage 1 (140hp stock)
- Renault Avantime 2.2 dCi — Stage 1 (150hp stock)
- Renault Captur Qm3 0.9 TCe — Stage 1 (90hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning