Renault Captur Qm3 1.0 TCe Stage 1: 90→113hp
Renault Captur Qm3 1.0 TCe Stage 1: 90hp → 113hp, 160→202Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens +…
Renault Captur Qm3 Stage 1: 90 hp → 113 hp
Factory output for the Renault Captur Qm3 1.0 TCe is 90 hp and 160 Nm. A Stage 1 remap targets 113 hp and 202 Nm — 23 hp (+26%) and 42 Nm (+26%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
What 23 hp changes on the road
A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 1.0 TCe from 90 hp to 113 hp, with torque from 160 Nm to 202 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.
Gains of this size (+26%) are normal for this kind of engine on pump fuel, with no hardware changes.
What Stage 1 involves on a Renault Captur Qm3
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 90 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 113 hp and 202 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which Renault Captur Qm3 this covers
These figures are for the 1.0 TCe as fitted 2019–2023. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
Renault Captur Qm3 remap price and booking
Stage 1 for the Renault Captur Qm3 1.0 TCe starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Renault Captur Qm3 engines
- Renault Captur Qm3 1.0 TCe GPL — Stage 1 (100hp stock)
- Renault Captur Qm3 1.2 TCe — Stage 1 (120hp stock)
- Renault Captur Qm3 1.3 TCe — Stage 1 (130hp stock)
- Renault Captur Qm3 1.3 TCe — Stage 1 (130hp stock)
- Renault Captur Qm3 1.3 TCe — Stage 1 (140hp stock)
- Renault Captur Qm3 1.3 TCe — Stage 1 (140hp stock)
- Renault Captur Qm3 1.3 TCe — Stage 1 (155hp stock)
- Renault Captur Qm3 1.3 TCe — Stage 1 (155hp stock)
- Renault Captur Qm3 1.3 TCe — Stage 1 (160hp stock)
- Renault Captur Qm3 1.3 TCe EDC — Stage 1 (150hp stock)
More Renault tuning
- Renault Clio 1.5 dCi — Stage 1 (65hp stock)
- Renault Clio RS 1.6T — Stage 1 (200hp stock)
- Renault Espace 1.9 dCi — Stage 1 (115hp stock)
- Renault Fluence 15Dci — Stage 1 (105hp stock)
- Renault Kadjar 1.2 TCe — Stage 1 (130hp stock)
- Renault Kangoo Express Van 1.5 dCi — Stage 1 (65hp stock)
- Renault Koleos 2.0 dCi — Stage 1 (150hp stock)
- Renault Laguna 1.9 dCi — Stage 1 (110hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning