Porsche Cayenne 3.0 DFI S E Hybrid Stage 1 Remap: 416→486hp
Porsche Cayenne 3.0 DFI S E Hybrid Stage 1: 416hp → 486hp, 590→726Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450.…
Porsche Cayenne Stage 1: 416 hp → 486 hp
Factory output for the Porsche Cayenne 3.0 DFI S E Hybrid is 416 hp and 590 Nm. A Stage 1 remap targets 486 hp and 726 Nm — 70 hp (+17%) and 136 Nm (+23%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
Where the 136 Nm shows up
On a diesel the useful change is torque, not peak power. Going from 590 Nm to 726 Nm fills in the mid-range, which is where a Porsche Cayenne actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.
Peak power moves too, 416 hp to 486 hp, but you will feel the 136 Nm far more often than the 70 hp.
What Stage 1 involves on a Porsche Cayenne
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 416 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 486 hp and 726 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which Porsche Cayenne this covers
These figures are for the 3.0 DFI S E Hybrid as fitted 2010–2014. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
Porsche Cayenne remap price and booking
Stage 1 for the Porsche Cayenne 3.0 DFI S E Hybrid starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Porsche Cayenne engines
- Porsche Cayenne 3.0 DFI S Hybrid — Stage 1 (380hp stock)
- Porsche Cayenne 3.0 TDI — Stage 1 (211hp stock)
- Porsche Cayenne 3.0 TDI — Stage 1 (240hp stock)
- Porsche Cayenne 3.0 TDI — Stage 1 (245hp stock)
- Porsche Cayenne 3.0T — Stage 1 (340hp stock)
- Porsche Cayenne 3.0T E Hybrid — Stage 1 (462hp stock)
- Porsche Cayenne 32I V6 — Stage 1 (250hp stock)
- Porsche Cayenne 3.6 DFI — Stage 1 (300hp stock)
- Porsche Cayenne 3.6 V6 — Stage 1 (290hp stock)
- Porsche Cayenne 4.0T S E Hybrid — Stage 1 (680hp stock)
More Porsche tuning
- Porsche Cayman 27I — Stage 1 (211hp stock)
- Porsche Macan 2.0 TFSI — Stage 1 (252hp stock)
- Porsche Panamera 3.0 DFI Hybrid — Stage 1 (380hp stock)
- Porsche Taycan 4S PB — Stage 1 (530hp stock)
- Porsche 718 Boxster/Cayman 2.0T — Stage 1 (300hp stock)
- Porsche 911 34I Carrera — Stage 1 (300hp stock)
- Porsche 911 991 3.4 Carrera — Stage 1 (350hp stock)
- Porsche 911 992 3.0T Carrera — Stage 1 (385hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning