Ford Explorer 2.3 EcoBoost Stage 1: 280→295hp
Ford Explorer 2.3 EcoBoost Stage 1: 280hp → 295hp, 420→480Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens +…
Ford Explorer Stage 1: 280 hp → 295 hp
Factory output for the Ford Explorer 2.3 EcoBoost is 280 hp and 420 Nm. A Stage 1 remap targets 295 hp and 480 Nm — 15 hp (+5%) and 60 Nm (+14%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
What 15 hp changes on the road
A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 2.3 EcoBoost from 280 hp to 295 hp, with torque from 420 Nm to 480 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.
Gains of this size (+5%) are normal for this kind of engine on pump fuel, with no hardware changes.
What Stage 1 involves on a Ford Explorer
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 280 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 295 hp and 480 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Ford Explorer remap price and booking
Stage 1 for the Ford Explorer 2.3 EcoBoost starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Ford Explorer engines
- Ford Explorer 3.0 EcoBoost V6 — Stage 1 (457hp stock)
- Ford Explorer 3.0 V6 — Stage 1 (365hp stock)
- Ford Explorer 3.5T V6 EcoBoost — Stage 1 (370hp stock)
- Ford Explorer 4.0 V8 — Stage 1 (210hp stock)
- Ford Explorer 4.6 V8 — Stage 1 (292hp stock)
- Ford Explorer ST 3.0 V6 — Stage 1 (457hp stock)
- Ford Explorer 2.0T EcoBoost — Stage 1 (240hp stock)
More Ford tuning
- Ford F-150 4.6 V8 — Stage 1 (248hp stock)
- Ford F-250 5.4 V8 — Stage 1 (320hp stock)
- Ford Fiesta 1.25i 16v — Stage 1 (70hp stock)
- Ford Figo 1.5 TDCi — Stage 1 (100hp stock)
- Ford Five Hundred 3.0 V6 — Stage 1 (205hp stock)
- Ford Flex 3.5 V6 — Stage 1 (287hp stock)
- Ford Focus 1.8 TDCi — Stage 1 (100hp stock)
- Ford Freestar 3.9 V6 — Stage 1 (195hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning