Dacia Sandero 0.9 TCe Stage 1: 90→126hp
Dacia Sandero 0.9 TCe Stage 1: 90hp → 126hp, 140→204Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens +…
Dacia Sandero Stage 1: 90 hp → 126 hp
Factory output for the Dacia Sandero 0.9 TCe is 90 hp and 140 Nm. A Stage 1 remap targets 126 hp and 204 Nm — 36 hp (+40%) and 64 Nm (+46%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
What 36 hp changes on the road
A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 0.9 TCe from 90 hp to 126 hp, with torque from 140 Nm to 204 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.
Gains of this size (+40%) are normal for this kind of engine on pump fuel, with no hardware changes.
What Stage 1 involves on a Dacia Sandero
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 90 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 126 hp and 204 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which Dacia Sandero this covers
These figures are for the 0.9 TCe as fitted 2016–2020. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
Dacia Sandero remap price and booking
Stage 1 for the Dacia Sandero 0.9 TCe starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Dacia Sandero engines
- Dacia Sandero 1.0 ECO G — Stage 1 (100hp stock)
- Dacia Sandero 1.0 TCe — Stage 1 (100hp stock)
- Dacia Sandero 1.0 TCe — Stage 1 (90hp stock)
- Dacia Sandero 1.5 dCi — Stage 1 (70hp stock)
- Dacia Sandero 1.5 dCi — Stage 1 (75hp stock)
- Dacia Sandero 1.5 dCi — Stage 1 (85hp stock)
- Dacia Sandero 1.5 dCi — Stage 1 (90hp stock)
- Dacia Sandero 0.9 TCe — Stage 1 (90hp stock)
More Dacia tuning
- Dacia Dokker 1.2 TCe — Stage 1 (115hp stock)
- Dacia Duster 1.2 TCe — Stage 1 (125hp stock)
- Dacia Jogger 1.0 ECO G — Stage 1 (100hp stock)
- Dacia Lodgy 1.2 TCe Euro — Stage 1 (115hp stock)
- Dacia Logan 1.5 dCi — Stage 1 (68hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning