Chevrolet S10 2.8 CDTI Stage 1: 200→235hp
Chevrolet S10 2.8 CDTI Stage 1: 200hp → 235hp, 500→560Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens +…
Chevrolet S10 Stage 1: 200 hp → 235 hp
Factory output for the Chevrolet S10 2.8 CDTI is 200 hp and 500 Nm. A Stage 1 remap targets 235 hp and 560 Nm — 35 hp (+18%) and 60 Nm (+12%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
Where the 60 Nm shows up
On a diesel the useful change is torque, not peak power. Going from 500 Nm to 560 Nm fills in the mid-range, which is where a Chevrolet S10 actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.
Peak power moves too, 200 hp to 235 hp, but you will feel the 60 Nm far more often than the 35 hp.
What Stage 1 involves on a Chevrolet S10
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 200 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 235 hp and 560 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Chevrolet S10 remap price and booking
Stage 1 for the Chevrolet S10 2.8 CDTI starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Chevrolet S10 engines
More Chevrolet tuning
- Chevrolet Silverado 4.3 V6 — Stage 1 (195hp stock)
- Chevrolet Spark 1.0i — Stage 1 (68hp stock)
- Chevrolet SS 6.2 V8 — Stage 1 (415hp stock)
- Chevrolet SSR 5.3 V8 — Stage 1 (305hp stock)
- Chevrolet Suburban 5.3 V8 — Stage 1 (295hp stock)
- Chevrolet Tahoe 4.8 V8 — Stage 1 (285hp stock)
- Chevrolet Traverse 3.6 V6 — Stage 1 (281hp stock)
- Chevrolet Trax 1.4 Turbo — Stage 1 (140hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning