BMW Series 2 Granactive Tourer 218d Stage 1 Remap: 150→193hp

BMW Series 2 Granactive Tourer 218d Stage 1 Remap: 150→193hp

BMW Series 2 Granactive Tourer 218d Stage 1: 150hp → 193hp, 360→406Nm. Custom DMS calibration written for your car — not an off-the-shelf file. From €450.…

BMW Series 2 Granactive Tourer Stage 1: 150 hp → 193 hp

Factory output for the BMW Series 2 Granactive Tourer 218d is 150 hp and 360 Nm. A Stage 1 remap targets 193 hp and 406 Nm — 43 hp (+29%) and 46 Nm (+13%).

Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.

Where the 46 Nm shows up

On a diesel the useful change is torque, not peak power. Going from 360 Nm to 406 Nm fills in the mid-range, which is where a BMW Series 2 Granactive Tourer actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.

Peak power moves too, 150 hp to 193 hp, but you will feel the 46 Nm far more often than the 43 hp.

What Stage 1 involves on a BMW Series 2 Granactive Tourer

We read the ECU, log the car as it stands, and put it on the dyno to confirm the 150 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.

The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 193 hp and 406 Nm figure and check knock, lambda and temperatures under load.

Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.

Which BMW Series 2 Granactive Tourer this covers

These figures are for the 218d as fitted 2021 onwards. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.

BMW Series 2 Granactive Tourer remap price and booking

Stage 1 for the BMW Series 2 Granactive Tourer 218d starts at €450, including the dyno runs before and after and the stock-file archive.

We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.

Other BMW Series 2 Granactive Tourer engines

More BMW tuning

More from DMS Tuned

WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning