BMW Series 1 123d Stage 1: 204→251hp
BMW Series 1 123d Stage 1: 204hp → 251hp, 400→452Nm. Custom DMS calibration written for your car — not an off-the-shelf file. From €450. Athens + remote.…
BMW Series 1 Stage 1: 204 hp → 251 hp
Factory output for the BMW Series 1 123d is 204 hp and 400 Nm. A Stage 1 remap targets 251 hp and 452 Nm — 47 hp (+23%) and 52 Nm (+13%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
Where the 52 Nm shows up
On a diesel the useful change is torque, not peak power. Going from 400 Nm to 452 Nm fills in the mid-range, which is where a BMW Series 1 actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.
Peak power moves too, 204 hp to 251 hp, but you will feel the 52 Nm far more often than the 47 hp.
What Stage 1 involves on a BMW Series 1
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 204 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 251 hp and 452 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Which BMW Series 1 this covers
These figures are for the 123d as fitted 2007–2011. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.
BMW Series 1 remap price and booking
Stage 1 for the BMW Series 1 123d starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other BMW Series 1 engines
- BMW Series 1 123d MAY 2010 — Stage 1 (204hp stock)
- BMW Series 1 125d — Stage 1 (211hp stock)
- BMW Series 1 125d — Stage 1 (218hp stock)
- BMW Series 1 125d — Stage 1 (224hp stock)
- BMW Series 1 125i 2.0T — Stage 1 (218hp stock)
- BMW Series 1 125i 2.0T — Stage 1 (224hp stock)
- BMW Series 1 125i — Stage 1 (211hp stock)
- BMW Series 1 125i — Stage 1 (218hp stock)
- BMW Series 1 125i MPP 2.0T — Stage 1 (238hp stock)
- BMW Series 1 128i — Stage 1 (228hp stock)
More BMW tuning
- BMW Series 2 218d — Stage 1 (136hp stock)
- BMW Series 2 Gc 216d — Stage 1 (116hp stock)
- BMW Series 2 Granactive Tourer 216d — Stage 1 (116hp stock)
- BMW Series 3 318d — Stage 1 (115hp stock)
- BMW Series 3 Gt 318d — Stage 1 (136hp stock)
- BMW Series 4 420d — Stage 1 (190hp stock)
- BMW X1 Sdrive18d — Stage 1 (150hp stock)
- BMW X2 M35i — Stage 1 (306hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning