BMW M2 3.0 Bi-turbo Stage 1: 460→640hp
BMW M2 3.0 Bi-turbo Stage 1: 460hp → 640hp, 550→800Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens +…
BMW M2 Stage 1: 460 hp → 640 hp
Factory output for the BMW M2 3.0 Bi-turbo is 460 hp and 550 Nm. A Stage 1 remap targets 640 hp and 800 Nm — 180 hp (+39%) and 250 Nm (+45%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
What 180 hp changes on the road
A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 3.0 Bi-turbo from 460 hp to 640 hp, with torque from 550 Nm to 800 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.
Gains of this size (+39%) are normal for this kind of engine on pump fuel, with no hardware changes.
What Stage 1 involves on a BMW M2
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 460 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 640 hp and 800 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
BMW M2 remap price and booking
Stage 1 for the BMW M2 3.0 Bi-turbo starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other BMW M2 engines
- BMW M2 3.0 Competition — Stage 1 (410hp stock)
- BMW M2 3.0 CS — Stage 1 (450hp stock)
- BMW M2 CS 3.0 Bi-turbo — Stage 1 (530hp stock)
- BMW M2 30 BI Turbo — Stage 1 (480hp stock)
- BMW M2 — Stage 1 (370hp stock)
- BMW M2 — Stage 1 (460hp stock)
- BMW M2 Competition — Stage 1 (410hp stock)
- BMW M2 CS — Stage 1 (455hp stock)
- BMW M2 3.0 — Stage 1 (370hp stock)
More BMW tuning
- BMW M3 E46 M3 — Stage 1 (343hp stock)
- BMW M4 — Stage 1 (480hp stock)
- BMW M5 49 V8 — Stage 1 (400hp stock)
- BMW M6 50 V10 — Stage 1 (507hp stock)
- BMW M8 Competition 44 V8 BI Turbo — Stage 1 (625hp stock)
- BMW Series 1 118d — Stage 1 (122hp stock)
- BMW Series 2 218d — Stage 1 (136hp stock)
- BMW Series 2 Gc 216d — Stage 1 (116hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning