BMW 4 Series 418i (1.5t) Stage 1: 136→165hp | DMS Tuned

BMW 4 Series 418i (1.5t) Stage 1: 136→165hp

BMW 4 Series 418i (1.5t) Stage 1: 136hp → 165hp, 220→270Nm. ✓ Run on our own dyno — real before/after sheet on file. Validated DMS calibration, proven on…

✓ We have run a BMW 4 Series like this on our own dyno

This is not a figure copied from a database. We hold a real before/after DynoRevolt sheet for the 418i (1.5t) — the 136 hp baseline and the Stage 1 result, measured in our own workshop, not estimated. Ask to see the run for your car.

BMW 4 Series Stage 1: 136 hp → 165 hp

Factory output for the BMW 4 Series 418i (1.5t) is 136 hp and 220 Nm. A Stage 1 remap targets 165 hp and 270 Nm — 29 hp (+21%) and 50 Nm (+23%).

Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.

What 29 hp changes on the road

A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 418i (1.5t) from 136 hp to 165 hp, with torque from 220 Nm to 270 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.

Gains of this size (+21%) are normal for this kind of engine on pump fuel, with no hardware changes.

What Stage 1 involves on a BMW 4 Series

We read the ECU, log the car as it stands, and put it on the dyno to confirm the 136 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.

The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 165 hp and 270 Nm figure and check knock, lambda and temperatures under load.

Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.

BMW 4 Series remap price and booking

Stage 1 for the BMW 4 Series 418i (1.5t) starts at €450, including the dyno runs before and after and the stock-file archive.

We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.

Other BMW 4 Series engines

More BMW tuning

More from DMS Tuned

WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning