BMW 3 Series 325d (1995cc) Stage 1: 211→270hp
BMW 3 Series 325d (1995cc) Stage 1: 211hp → 270hp, 450→500Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens +…
BMW 3 Series Stage 1: 211 hp → 270 hp
Factory output for the BMW 3 Series 325d (1995cc) is 211 hp and 450 Nm. A Stage 1 remap targets 270 hp and 500 Nm — 59 hp (+28%) and 50 Nm (+11%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
Where the 50 Nm shows up
On a diesel the useful change is torque, not peak power. Going from 450 Nm to 500 Nm fills in the mid-range, which is where a BMW 3 Series actually spends its time — pulling from 1,800 to 3,000 rpm in a high gear, overtaking without dropping two gears, towing or carrying weight without the engine falling on its face.
Peak power moves too, 211 hp to 270 hp, but you will feel the 50 Nm far more often than the 59 hp.
What Stage 1 involves on a BMW 3 Series
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 211 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing, injection timing and boost, then re-run the dyno to verify the 270 hp and 500 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
BMW 3 Series remap price and booking
Stage 1 for the BMW 3 Series 325d (1995cc) starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other BMW 3 Series engines
- BMW 3 Series 325d (1995cc) — Stage 1 (218hp stock)
- BMW 3 Series 325d (1995cc) — Stage 1 (224hp stock)
- BMW 3 Series 325i — Stage 1 (192hp stock)
- BMW 3 Series 325i - N52 - — Stage 1 (211hp stock)
- BMW 3 Series 325i - N52 - — Stage 1 (218hp stock)
- BMW 3 Series 325i - N53 - — Stage 1 (211hp stock)
- BMW 3 Series 325i - N53 - — Stage 1 (218hp stock)
- BMW 3 Series 328i — Stage 1 (193hp stock)
- BMW 3 Series 328i — Stage 1 (230hp stock)
- BMW 3 Series 328i — Stage 1 (245hp stock)
More BMW tuning
- BMW 3 Series GT 318d — Stage 1 (136hp stock)
- BMW 4 Series 418d — Stage 1 (150hp stock)
- BMW 4 Series GC 418d — Stage 1 (136hp stock)
- BMW 5 Series 520d — Stage 1 (136hp stock)
- BMW 5 Series GT 520d — Stage 1 (163hp stock)
- BMW 6 Series 630i — Stage 1 (258hp stock)
- BMW 6 Series GT 620d — Stage 1 (190hp stock)
- BMW 7 Series 725 TDS — Stage 1 (143hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning