Aston Martin Vantage 4.0 V8 BI Turbo Stage 1 Remap: 510→572hp

Aston Martin Vantage 4.0 V8 BI Turbo Stage 1 Remap: 510→572hp

Aston Martin Vantage 4.0 V8 BI Turbo Stage 1: 510hp → 572hp, 685→823Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From…

Aston Martin Vantage Stage 1: 510 hp → 572 hp

Factory output for the Aston Martin Vantage 4.0 V8 BI Turbo is 510 hp and 685 Nm. A Stage 1 remap targets 572 hp and 823 Nm — 62 hp (+12%) and 138 Nm (+20%).

Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.

What 62 hp changes on the road

A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 4.0 V8 BI Turbo from 510 hp to 572 hp, with torque from 685 Nm to 823 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.

Gains of this size (+12%) are normal for this kind of engine on pump fuel, with no hardware changes.

What Stage 1 involves on an Aston Martin Vantage

We read the ECU, log the car as it stands, and put it on the dyno to confirm the 510 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.

The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 572 hp and 823 Nm figure and check knock, lambda and temperatures under load.

Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.

Which Aston Martin Vantage this covers

These figures are for the 4.0 V8 BI Turbo as fitted 2018–2023. Engine code and ECU type decide what is possible, so send us the registration or VIN and we will confirm the exact variant before you book anything.

Aston Martin Vantage remap price and booking

Stage 1 for the Aston Martin Vantage 4.0 V8 BI Turbo starts at €450, including the dyno runs before and after and the stock-file archive.

We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.

Other Aston Martin Vantage engines

More Aston Martin tuning

More from DMS Tuned

WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning