Seat Leon Mk3 2.0 TSI Cupra Stage 1: 290→377hp
Seat Leon Mk3 2.0 TSI Cupra Stage 1: 290hp → 377hp, 350→473Nm. Validated DMS calibration, proven on our dyno — not an off-the-shelf file. From €450. Athens…
Seat Leon Mk3 Stage 1: 290 hp → 377 hp
Factory output for the Seat Leon Mk3 2.0 TSI Cupra is 290 hp and 350 Nm. A Stage 1 remap targets 377 hp and 473 Nm — 87 hp (+30%) and 123 Nm (+35%).
Those are the figures we work to on this engine. They are a starting point, not a promise: the number we hand back is the one your car makes on our dyno, measured before and after on the same day, in the same conditions.
What 87 hp changes on the road
A turbocharged petrol responds to a remap mostly through boost and ignition timing. Taking the 2.0 TSI Cupra from 290 hp to 377 hp, with torque from 350 Nm to 473 Nm, sharpens throttle response and shortens the gap between asking for power and getting it — the car stops feeling like it is thinking about it first.
Gains of this size (+30%) are normal for this kind of engine on pump fuel, with no hardware changes.
What Stage 1 involves on a Seat Leon Mk3
We read the ECU, log the car as it stands, and put it on the dyno to confirm the 290 hp baseline — a tired or faulty engine gets diagnosed before it gets mapped, not after.
The calibration is written for your car, not pulled from a file library. We adjust fuelling, ignition timing and boost pressure, then re-run the dyno to verify the 377 hp and 473 Nm figure and check knock, lambda and temperatures under load.
Turnaround is same-day for most cars. Stock file is archived, so the car can go back to standard whenever you want.
Seat Leon Mk3 remap price and booking
Stage 1 for the Seat Leon Mk3 2.0 TSI Cupra starts at €450, including the dyno runs before and after and the stock-file archive.
We work from Leoforos Karamanli 127, Artemida 19016, east of Athens, and tune remotely across Europe where the ECU allows it. WhatsApp +30 697 728 8810 with your registration for a straight answer on your car.
Other Seat Leon Mk3 engines
More Seat tuning
- Seat Leon Mk4 2.0 TSI Cupra — Stage 1 (300hp stock)
- Seat Tarraco 1.5 TSI — Stage 1 (150hp stock)
- Seat Toledo 1.6 TDI — Stage 1 (102hp stock)
- Seat Alhambra 1.9 TDI — Stage 1 (90hp stock)
- Seat Altea 1.2 TSI — Stage 1 (105hp stock)
- Seat Altea Xl 1.2 TSI — Stage 1 (105hp stock)
- Seat Arona 1.0 TGI — Stage 1 (90hp stock)
- Seat Ateca 1.0 TSI — Stage 1 (115hp stock)
More from DMS Tuned
- ECU tuning by brand
- Stage 1 & Stage 2 remap
- Remote ECU tuning
- DPF / EGR / AdBlue solutions
- ECU remapping packages
- Mazda MX-5 tuning
- MX-5 2.5 Duratec swap
- Our dyno
- Projects
- Pricing
- Reviews
- Contact
WhatsApp +30 697 728 8810 · Επικοινωνία · Τιμές · Δυναμόμετρο · ECU Tuning